The connection to a PC / network switch with a standard RJ45 network socket is made using a suitable data cable for M12 D-coding, e.g.Phoenix Contact VS-MSD-IP20-93E network cable to RJ45.
Standard settings MovingCap TCP/IP
IP address: 192.168.2.150
Subnet mask: 255.255.255.0
Gateway: -
DHCP: - not available -
DNS: - not available -
NOTE: If you do not know the IP address set in the MovingCap, you can determine the address as described in the section Display via Morse code.
Preparing the network connection
•Connect a USB-to-Ethernet adapter to your PC or use the built-in RJ45 Ethernet connection.
•Change the connection settings for this connection to an IP4 address in the same subnet (but different end number) as the MovingCap setting, e.g:
IP address: 192.168.2.10
Subnet mask: 255.255.255.0
Gateway: -
DNS: -
In Windows 11 this can look like this:
