Function 9 can be used to simplify application creation and to define an input contact as a precondition for the "Switched On" state .
|
WARNING! The "Software Enable" function is NOT a safety function. It is NOT intended to implement safety functions in the context of machine safety. |
NOTE: If the Software Enable input is missing, the error code FFF2 / ERROR_HW_SW_ENABLE is generated each time a switch-on attempt is made.
Subindex |
Type |
Type Access |
Value / Description |
01h |
unsigned16 |
R/W |
0900h - Drive can only be switched to the "Switched On" state if input = High 0009h - Drive can only be switched to the "Switched On" state if input = Low |
