•Open the web interface by entering 192.168.2.150 (or the IP address set on the MovingCap) in the address bar.
TIP: If you do not know the IP address that has been set (anymore), you can find it out via the LED display.
•Select the Back & Forth function in the Click & Run menu.
The drive starts oscillating over the distance specified by Target Distance (Move Rel).
NOTE: The starting point of the "Back & Forth" movement is the last specified target position, even if this movement was interrupted prematurely, e.g., by "Stop Motion." If no movement has been made since the drive was started, the starting position is the current actual position.
