MovingCap Ethernet TCP/IP (ETH) drives have two LED indicators as standard
LED color |
Designation |
Description |
Yellow |
LINK/ACT |
Connection status and activity of the network connection |
green |
STATUS |
MovingCap IP address and status via Morse code |
Decode Morse code / determine IP address
Among other things, the green status LED continuously transmits the currently set IP address and can be evaluated as follows:
•Install a Morse code decoder app such as "Morse Code Encoder & Decoder" (Noldy Labs) or "Morse Code Engineer" (GyokovSolutions) on a smartphone
•Start the Morse app and use the camera to film the green LED as close as possible and with as little interfering light as possible. Hold the smartphone as still as possible.
•Wait at least 2 minutes or until you have decoded two consecutive identical texts to ensure that the decoding was correct.
The MovingCap Morse message with IP default setting is e.g:
MC+IP192+168+2+150:
(As a Morse code, the plus sign is significantly shorter than a decimal point and is therefore used as a separator).
NOTE: If a Morse app is not possible for you, you can also film the green LED for at least 2 minutes and provide us with the video for decoding. You can find our contact information at www.fullmo.de
